This series of lathe machine is used widely, flexible operation, suitable for processing all kinds of complex shapes of shafts, sets, disk parts, such as turning inner and outer cylindrical surface, conical surface, circular surface, end face, grooving, chamfer, threading, Especially for multi-species, small batch of turns processing, process adaptability, high processing efficiency, low scrap rate, good product consistency, easy programming, simple operation, reducing the technical requirements of workers, it is the ideal medium mechanical processing
Please click on the picture to view the product category you are interested in
CNC Heavy Duty Horizontal Lathe Machine Flat Bed CNC Lathe For Metal(Torno Mecanico Machine)
1 This series CNC lathe adopts standard cast iron (HT300) a molding casting, after the second aging treatment, it has feature of stable performance; guide-way width (600mm), good rigidity, anti-vibration ability; Processed by medium-frequency hardening (hardness more than SHAW 68) and machined by the imported guideway grinding machine, to ensure a long service life, high precision and good maintainability.
2 This series machine spindle bore has two kinds, one is Φ100mm, the other is Φ140mm . Spindle bearing uses China's well-known bearing made by HRB, LYC and ZWZ, aslo can be configured NSK, SKF and other imported bearings. Bore diameter of Φ140mm to meet the larger bar or tube parts processing.
3 CNC system uses the internationally renowned FANUC, SIEMENS or China GSK AC servo control system. The lathe machine adopts semiclosed protection or fully enclosed protection, equipped with emergency stop safety button, when the machine suddenly encountered a sudden power failure or other failures, due to the special design of the control circuit, it can be self-protection to ensure that the machine and personnel safety. The operation panel is about 1500mm from the ground, highly moderate, ergonomic, pleasant and easy to operate and understand the operation of the machine.
4 All the lathe machines are equipped with electric turret, free lifting, tool change quickly and easily, there are vertical 4 and 6 station, horizontal 6 station and other electric turret for choice.
| SPECIFICATION |
UNIT |
AK800 |
AK1000 |
| Max. swing over bed |
mm |
800 |
1000 |
| Max.. swing over cross slide |
mm |
480 |
680 |
| Distance between centers |
mm |
1000/1500/2000/3000/4000/5000/6000/8000/- |
| Max. turning length |
mm |
850/1350/1850/2850/3850/4850/5850/7850/- |
| Bed width |
mm |
600 |
600 |
| Loading capacity |
kg |
3000 |
3000 |
| Spindle nose |
mm |
C11(C15 optional) |
C11(C15 optional) |
| Spindle bore |
mm |
100(140 optional) |
100(140 optional) |
| Spindle taper |
- |
Metric 120 (Metric 150 optional) |
Metric 120 (Metric 150 optional) |
| Spindle speed (Manual steps) |
rpm |
6-750(18) |
6-750(18) |
| Spindle speed(Manual 4steps stepless) |
rpm |
8-800 |
8-800 |
| Spindle speed(Hydraulic 4steps stepless) |
rpm |
8-800 |
8-800 |
| Center height |
mm |
400 |
500 |
| Chuck size |
mm |
400 |
400 |
| X/Z-axis min. feed unit |
mm |
0.001/0.001 |
0.001/0.001 |
| X/Z-axis rapid feed speed |
mm/min |
4000/5000 |
4000/5000 |
| Cross travel (X) |
mm |
420 |
420 |
| Tool post type |
- |
V4(V6/H6/H8 optional) |
V4(V6/H6/H8 optional) |
| Tool change time |
s |
2.4 |
2.4 |
| Turret repeat positioning accuracy |
mm |
0.008 |
0.008 |
| Tool section size |
mm |
40x40 |
40x40 |
| Tailstock quill diameter |
mm |
100 |
100 |
| Tailstock quill travel |
mm |
250 |
250 |
| Tailstock quill taper |
- |
MT6(MT5 optional) |
MT6(MT5 optional) |
| Working accuracy |
- |
IT6 |
IT6 |
| Surface roughness |
µm |
Ra1.6 |
Ra1.6 |
| Main motor power |
kw |
15 |
15 |
| Machine weight |
kg |
4800/5300/5600/6000/6800/7600/8250/9750/- |
| Machine length |
mm |
3605/4105/4645/5600/6430/7600/8485/10485/- |
| Machine width |
mm |
2219 |
2219 |
| Machine height |
mm |
1830 |
2010 |
| CNC system |
- |
FANUC/GSK/SIEMENS |
FANUC/GSK/SIEMENS |
1 The bed (from 1000mm-5000mm) is one-piece type, 6000mm and above bed is two pieces butted.
2 Automatic hydraulic 4 shifts exchange controlled by M-code, automatically stepless speed change controlled by the S-code selection; Manual 4steps changing speed controlled by hand, automatically stepless speed change controlled by the S-code selection; Manual 18 steps changing speed controlled by hand.
3 The spindle box adopts a symmetrical structure to make the thermal deformation uniform and avoid the offset of the center of the spindle. To reduce thermal deformation, the headstock is lubricated with an oil bath cycle. The front end of the main shaft adopts a three-support structure of a two-way angular contact ball bearing. Improve accuracy and increase rigidity. The gears in the headstock are quenched and grounded to ensure accurate transmission and low noise.
4 The main motor is 15kw high-power frequency motor; equipped with Ф400 standard manual three-jaw self-centering chuck, according to endusers requirement different size manual, pneumatic and hydraulic three-jaw and four- jaw chuck can be chosen.
STANDARD ACCESSORIES:
FANUC/GSK/SIEMENS CNC system, 3-jaw chuck, 4-station electric tool-post, Work lamp, Cooling system, Semi-closed guard, Manual pulse generator (MPG), Dead centers, Oil gun, Pilot lamp, Automatic lubrication pump, Manual moving tailstock, Tools & tool-box, Leveling wedge & bolts, Operation manual (English). |
OPTIONAL ACCESSORIES:
4-jaw chuck, Steady rest, Follow rest, Hydraulic chuck, Penumatic chuck, Hydraulic tailstock, 6-station tool-post, Live centers, Air conditioner, Chip conveyor, Full guard. |
1. Free replacing parts available in the warranty period. Cost price replacing parts available beyond the warranty period.
2. Quick action and reply for the technical questions at any time in the whole life of the machine.
3. Overseas after service center available in some region.
4. Engineer overseas service available on the requirement of customer(relative cost born by customer).
Timeway Machine Tool Co., Ltd. is a professional machine tool manufacturing enterprises, the main products include lathe, milling machine, grinding machine, etc., and according to customer needs we also can design and manufacture various special purpose machines, to provide relative technology upgrading and transformation services in machine tool field.
Since the establishment of the Ministry of Foreign Trade, we have participated in various domestic and international exhibitions such as the Autumn Canton Fair, Beijing Exhibition, Shanghai Exhibition, Moscow, Ethiopia, and Russia, and have maintained long-term friendly cooperative relations with exhibition customers.
So far, we have received many customers from abroad, and they are all very satisfied with our company and products
The following is one of the most satisfactory products recommended by customers, as well as our main product categories. you can click and view
Q: Why choose TIMEWAY MACHINE?
A: 1 . High quality with competitive price;
2 . Professional R&D team and 25 years export experience;
3 . Exported more than 60 countries;
4 . CE, ISO Certificates;
5 . 24 HOURS ONLINE SERVICE (SKYPE, WhatsApp, Wechat, Trademanager);
6 . 12 months quality warranty;
7 . Oversea engineers available for problem resolving;
Q: Do you have QC or any safety standards for your machinery?
A: yes, we have established a highly strict quality control department to guanrantee good quality.
Q: What's the MOQ?
A: 1 set (Only some low cost machines will be more than 1 set )
Q: What about the payment terms?
A: (1) T/T with 30% advanced payment, and 70% balance payment to be paid before shipment;
(2) Irrevocable LC at sight;
(3) Western Union, MoneyGram, etc.
Q: How about the warranty?
A: Warranty Period is one year after delivery. Even beyond the period, we will supply lifetime service for machine.
Audited Supplier 
){kind=link}